Stepper Motor: Bipolar, 200 Steps/Rev, 35x28mm, 10V, 500mA hub-module s not easy to get

s not easy to get the wires back out

Dokumente:

and amount of braking when speed is zero

This motor driver shield and its corresponding Arduino library make it easy to control two bidirectional

auch in Umgebungen mit akustischen oder elektrischen Störungen

Stepper Motor: Bipolar, 200 Steps/Rev, 35x28mm, 10V, 500mA hub-module s not easy to getThis bipolar hybrid stepper motor has a 1. 8 step angle (200 steps revolution). Each phase draws 500 mA at 10 V, resulting in a holding torque of 1000 g cm (14 oz in). The stepper motor has four colored wires with bare ends: black and green go to one coil; red and blue to the other. The motor can be controlled by a suitable pair of H bridges (one for each coil), but we recommend using a bipolar stepper motor driver. 5mm mounting hubs can be used to